Menu
MENU

Self Adhesive Labels

Eπίσης, δείτε Συστήματα Barcode & POS.

Tyres

Note: Novatron does not print labels.


Tyre labelling presents a real challenge for pressure sensitive adhesives. The roughness of the substrate and the uneven tyre profile severely limit the contact area between the tyre and label. The adhesive must also withstand migration from chemical components of the rubber as well as the wax or silicone-based chemicals often used as mould-release agents during the tyre manufacturing process. Very aggressive immediate adhesion is required.

Tyres are normally labelled in room temperature by hand or increasingly by automatic dispensing. Subsequent storage conditions can vary from room temperature to warmer or colder conditions in warehouses or outdoors. Accordingly, the adhesive must also maintain its properties in low and high temperatures.

ADHESIVES

RHT

The heavy duty RHT adhesive proves its performance every day on the production lines of nearly every tyre manufacturer. This high-tack, high coat-weight adhesive assures excellent performance to minimise re-labelling due to lost labels and assure reliable tracing and identification.

RH40

RH40 is supplied with cost-efficient label stock alternatives for labelling relatively smooth and even surfaces on particular car and motorcycle tyres.

RD50

RD50 is specially developed for tyre manufacturers’ internal logistics. Labels are dispensed onto the side of the rubber tyre before the vulcanisation process which bonds the tyre components and produces the tread.

Self-Adhesive Labels for Beverages

Note: Novatron does not print labels.


The beverage industry is renowned for exceptional branding and marketing to catch the eye of the consumer and stimulate point-of-sale decision-making. Labels need to maintain a high-quality appearance and flawless performance in variable conditions during the lifecycle of the bottle.

During the bottling process, the adhesive must provide good tack in manual and automatic applications, possibly at low temperatures and in humid conditions. Areas where there is inconsistent contact between the label and bottle might not be visible immediately, but can lead to the development of bubbles or creases.

With clear filmic materials supporting a pristine ‘no-label look’ it’s vital that the adhesive remains clear during the life of the bottle. Excellent surface contact is required for good adhesive wet-out to prevent haziness. If exposure to moisture or water will be concerns after labelling, the adhesive needs to be resistant to water-whitening.

ADHESIVES

RP37

Multipurpose and multi-tasking

This multipurpose adhesive is for film label faces on. paper liners, and provides good adhesion on glass and even plastics. RP37 has good resistance to water and UV to retain reliable properties of adhesion for the entire label lifecycle. An optimal balance of high adhesion and high cohesion provides clean and stable performance in high-speed conversion and label dispensing, even in potentially moist and chilled conditions.

RP74

Quality, ultra-clear ‘no-label look’

RP74 is designed for a quality no-label look in combination with clear label faces and PET film liners,which encourage a smooth and clear adhesive wet-out. Long-lasting clarity is assured by excellent resistance to water-whitening once labelled. Good cohesion provides clean and stable performance in high-speed conversion and label dispensing.

RP76E

High-speed, high-productivity labelling

Specially designed for beverage and spirits labelling, RP76E provides good adhesion to smooth polar surfaces like glass bottles and metal and lacquered metal cans. It is supplied with clear film label faces on filmic liners. Excellent UV-stability plus resistance to water-whitening once labelled assures long-lasting clarity.

RP76E’s extra-high cohesion and the strength of a PET liner enable reliable high speeds and high productivity in label conversion and dispensing.

RC7B

Wet labelling clarity plus pasteurization

This UV-acrylic adhesive is designed for bottle labelling applications where excellent water and moisture resistance are required – providing good adhesion and retaining its clarity even on wet bottles. RC7B’s excellent temperature and water-whitening resistance also make ita good match for applications where bottles are labelled prior to pasteurization.

RC7W

Clean wash-off for recovering food-grade PET

RC7W is specially designed for wash-off film labels on PET beverage bottles destined for recycling. During the wash-off process in hot caustic, gravity separates label materials with RC7W from ground-up PET bottles. This produces pure, food-grade polyester suitable for re-use as bottles. RC7W has excellent performance in highspeed dispensing and is resistant to water-whitening once labelled.