Menu
MENU

Self Adhesive Labels

Eπίσης, δείτε Συστήματα Barcode & POS.

Tyres

Note: Novatron does not print labels.


Tyre labelling presents a real challenge for pressure sensitive adhesives. The roughness of the substrate and the uneven tyre profile severely limit the contact area between the tyre and label. The adhesive must also withstand migration from chemical components of the rubber as well as the wax or silicone-based chemicals often used as mould-release agents during the tyre manufacturing process. Very aggressive immediate adhesion is required.

Tyres are normally labelled in room temperature by hand or increasingly by automatic dispensing. Subsequent storage conditions can vary from room temperature to warmer or colder conditions in warehouses or outdoors. Accordingly, the adhesive must also maintain its properties in low and high temperatures.

ADHESIVES

RHT

The heavy duty RHT adhesive proves its performance every day on the production lines of nearly every tyre manufacturer. This high-tack, high coat-weight adhesive assures excellent performance to minimise re-labelling due to lost labels and assure reliable tracing and identification.

RH40

RH40 is supplied with cost-efficient label stock alternatives for labelling relatively smooth and even surfaces on particular car and motorcycle tyres.

RD50

RD50 is specially developed for tyre manufacturers’ internal logistics. Labels are dispensed onto the side of the rubber tyre before the vulcanisation process which bonds the tyre components and produces the tread.

Home Care & Personal Care

Note: Novatron does not print labels.


Home and personal care labelling leverages strong brand imagery to attract consumers.

Lasting presentation is a challenge, however, because products are often used in wet and humid conditions over long periods of time. Labels may also encounter a wide range of oils and chemicals from the container contents.

Labels also typically need to flex with squeezable plastic packaging without forming creases. If the label suffers edge-lift or other loss of contact, the adhesive will be at risk of whitening when exposed to water.

WET WIPES APPLICATIONS

Note: Novatron does not print labels.


Wet wipes packs require an adhesive with resistance to oil, chemicals and water to retain good open-closure performance for the duration of the product’s useful life. The adhesive shouldn’t leave any sticky residue, it should help prevent label creases and curls, and it should seal well to prevent content leakage. UPM Raflatac provides two resilient UV-acrylic adhesives which cover the majority of commonly used package types.

RC12 has relatively high tack for applications where a, stronger peel is desired, and provides long-lasting openclosure, functionality.

RC13 suits applications where the preference is for a softer, smoother and quieter peel.