Menu
MENU

Self Adhesive Labels

Eπίσης, δείτε Συστήματα Barcode & POS.

Pharmaceutical & Healthcare

Note: Novatron does not print labels.


Our pharmaceutical adhesives are developed, formulated and manufactured to meet industry regulations and safety requirements, including EMA, FDA, and IPAC-RS guidelines. We guarantee long-term stability of supply, with a minimum of 36 months’ rolling availability of unchanged materials and 12 months’ notice in advance of product changes. Full documentary support is provided for validation and approvals.

ADHESIVES

RP80 LT

Low-temperature storage down to -80C with multiple freeze-thaw cycles

RP80 LT is designed to perform in storage conditions down to -80 C. The RP80 LT adhesive also withstands multiple thawing and freezing cycles as samples are thawed at room temperature or in warm or iced water, and later returned to the freezer.

With good mandrel hold, this adhesive is recommended for identification labelling on laboratory vials, ampoulesand test tubes, as well as plates, slides, steel cabinetsand storage boxes. RP80 LT retains its adhesion for extended periods, on surfaces including glass, steel, cardboard and PP.

RP Cryo

Cryopreservation labelling down to -196 C

Cryogenic storage stops time for countless tissues, cell types and subcellular materials. But if these biological samples can’t be identified, they are lost forever.

UPM Raflatac label materials based on the RP Cryo adhesive withstand steam autoclave sterilization and cryopreservation conditions down to -196 C, in both vapour phase and liquid nitrogen. This adhesive is extremely resistant to thermal shock, and provides a strong and enduring bond to polypropylene (PP) cryogenic vials, tubes and storage boxes.

RP Cryo also withstands multiple thawing and freezing cycles, further ensuring that valuable biological samples are identifiable for the duration of their cryogenically extended lifetimes.

RP31 Purus

Migration-safe labelling for liquid drugs in plastic containers

RP31 Purus is a ‘migration safe’ adhesive with low leachable characteristics. Leachables are compounds that leach from packaging because of direct contact with the drug product under normal storage conditions and could potentially be dosed to a patient. Migration is a concern particularly for drugs in liquid or gaseous form, stored in containers made from plastic materials.

RP31 Purus performs well on small diameters and curved surfaces, and on a variety of labelling substrates including PP, PE and low-density polyethylene (LDPE). LDPE is widely used for squeezable nose or eye-drop containers, where migration safety is critical.

The FDA has assigned Drug Master file (DMF) number 25392, type III for RP31 Purus.

RP32 PB

Primary blood bag labelling

Regulatory requirements and the extreme conditions associated with blood storage and processing place stringent demands on labels for blood bags. RP32 PB has been developed and tested according to guidance from the ISO 3826 standard. It withstands temperatures of +121 C during steam sterilization, down to long-term storage conditions of -80 C. It also tolerates freezing in ethanol at -50 C.

RP32 PB has low-leachable characteristics on blood bags and is compatible with various plasticizers used in PVC blood bag manufacturing, including the most common, DEHP.

RP32 PB is supplied with a choice of non-PVC label faces according to market preferences.

RP31, RP31L, RC3P

Labelling small diameters

Small-diameter containers – such as syringes, ampoules, cartridges, pens, vials and test tubes – place special demands on label construction. UPM Raflatac’s research indicates that a diameter of 15 mm is the threshold at which the choice of label material becomes critical. Thin and flexible label faces are supplied with the following adhesives for optimal performance.

RP31 is formulated for labelling curved surfaces and small-diameter packaging. It offers a reliable solution for a wide variety of applications requiring excellent mandrel hold. RP31 bonds strongly to glass, HDPE and PP ubstrates.

RP31L is essential in applications where product identification must be secured by reducing the risk of missing labels to zero. Supplied with clear films, RP31L offers luminescent functionality for missing label detection on label dispensing lines and is a convenient and consistent solution compared to luminescent varnishing on-press.

RC3P is a UV-acrylic adhesive with excellent clarity for labelling on glass and is especially beneficial for visual checks of liquid container contents. Good water, heat and chemical resistance make RC3P suitable for a wide range of applications as well as end-uses requiring resistance to steam autoclave sterilization.

RP3H

Genuinely self-adhesive on surgical sterilization wraps and bags

ΤReusable surgical instruments leaving hospital operating theatres are cleaned, washed, packed on trays and wrapped in non-woven or crepe wrapping material, prior to sterilization by steam autoclave. Allpacks are individually labelled for identification and traceability.

RP3H retains excellent adhesion in the steam, pressure, and heat of the autoclave process, which is typically at 134 C for up to 18 minutes. This adhesive also accommodates swelling and shrinkage of various wrapping materials during and after processing.

Uniquely, RP3H labels are genuinely self-adhesive because no additional sealing tape is required to secure label adhesion. Light application by hand is both convenient and cost- efficient.

Oil & Industrial Chemical

Note: Novatron does not print labels.


Safety, information, traceability, and the prevention of stock losses – the label transforms industrial chemicals stored in Intermediate Bulk Containers (IBCs), steel and HDPE drums and many other container types into usable goods.

Adhesive selection needs to take into account the surface energy of polar surfaces like metals, paints and lacquers, and more challenging non-polar surfaces such as HDPE plastic. Other parameters include the smoothness or roughness of the labelled surface, the condition of the surface at the time of label application, and possible requirements for momentary repositionability.

After labelling, the adhesive needs to tolerate the conditions in which containers are stored and transported as well as any contact with the container contents. UPM Raflatac draws on decades of technical expertise to formulate adhesives for these highly demanding applications, for the lifetime of the labelled goods.

Wines, Spirits & Craft Beverages

Note: Novatron does not print labels.


In the competitive wine, spirit and craft beverage industries, it’s all about the brand and how it is portrayed on the bottle. Producers from global brands to small independent companies compete for space on crowded retail shelves, so eye-catching wine and spirits labels provide a powerful edge.

No matter how fine the label face, its design and print work, correct adhesive selection provides a vital technical foundation for accomplishing immaculate visual appeal. While glass is a relatively straightforward substrate for achieving good adhesion, factors such as bottle surface treatments create huge variation in surface energy, which must be 38 dynes/cm or above.

Bottle contours and especially the lifecycle conditions of the product also present a challenge. Bottles may be cold and moist during label application. Temperature and humidity will certainly fluctuate during transport and long durations in storage. Extended refrigeration and ice bucket conditions may also be considerations. The various risks include label slide resulting in poor alignment during label application, edge-lift, bubbling and creasing.

Wine, spirit, and craft beverage adhesives from UPM Raflatac perform to the most demanding technical requirements, so that brands perform to the highest expectations.

ADHESIVES

RP30

Compelling presentation for the lifecycle of the label

Maintaining compelling presentation throughout the lifecycle challenges of wines and spirits takes a dedicated adhesive like RP30. This adhesive provides all the required properties for labelling champagnes and sparkling wines, whites, reds, roses and all spirits and liqueurs.

High initial tack provides excellent adhesion on the dispensing line and prevents label slide, even on moist and cold surfaces.

Good accommodation of fluctuations in temperature and humidity keeps labels looking their best without bubbling or creasing, from the bottling line, to transport and storage, to serving. RP30 also retains good hold in ice bucket conditions and provides good resistance to edge-lifting for reliable presentation on bottle necks when combined with recommended face materials.

RP30W

Efficient wash-off for returnable bottles

In the wash-off process for returnable bottles, the RP30W adhesive separates from bottles and stays anchored to the label face. This leaves the wash water uncontaminated and yields residue-free bottles for optimal presentation when recirculated. In particular, RP30W retains good wash-off performance following a variety of storage conditions for used bottles – including storage outdoors. This is where many wash-off adhesives fail, and where RP30W makes the difference. RP30W also performs reliably on label dispensing lines even in cold conditions.

WITH FILMIC FACE STOCKS

RC7W is specially designed for wash-off film labels on PET beverage bottles destined for recycling. During the wash-off process in hot caustic, gravity separates label materials with RC7W from ground-up PET bottles. This separation produces pure, food-grade polyester suitable for re-use as bottles.

RP37

Clear, strong and resilient adhesion

RP37 is a multipurpose adhesive for label films in combination with paper liners, with properties well-suited to wine and spirits labelling. Strong adhesion combines with good resistance to water and UV, for resilience in a variety of conditions.

RP74

High transparency ‘no-label look’

RP74 is designed for a quality no-label look on transparent containers such as PET and glass. It is combined with clear label faces on PET film liners to encourage a smooth and clear adhesive wet-out. Long-lasting clarity is assured by excellent resistance to water-whitening once labelled.

RP76E

Enduring clarity, exuding quality

RP76E is specifically designed for ultra-clear bottle labelling. It is combined with clear film faces and filmic liners to produce a smooth adhesive layer for an optimally clear adhesive wet-out.

With excellent UV-stability and resistance to whitening when exposed to water and ice-bucket conditions, the enduring clarity of RP76E reinforces perceptions of quality.

RC7B

Wet bottle labelling clarity plus pasteurization

This UV-acrylic adhesive for film label faces has excellent resistance to moisture and water. In particular, RC7B provides good adhesion and retains its clarity even when applied to wet bottles.

RC7B’s excellent temperature and water-whitening resistance also make it a good match for applications where bottles are labelled prior to pasteurization.

RC7W

Clean wash-off for recovering food-grade PET

RC7W is specially designed for wash-off film labels on PET beverage bottles destined for recycling. During the wash-off process in hot caustic, gravity separates label materials with RC7W from ground-up PET bottles. This separation produces pure, food-grade polyester suitable for re-use as bottles.

Retail & Logistics

Note: Novatron does not print labels.


Retail labels are applied to goods in stores, from books and home d cor items to shoes and mattresses. They serve a range of purposes: promotional and decorative use, in-store pricing, weigh-scale labelling, size-marking and other informational needs.

Typically, general purpose adhesives are used. In cases, adhesives are dedicated to substrates such as textiles, or they have finely tuned properties for a particular application. Food labelling has a specific range of needs and regulatory requirements and is covered in its own chapter in this book.

For logistics and transport end-uses, self-adhesive labels are typically variable information printing (VIP) products which route, track and trace objects throughout the supply chain, support inventory management, and streamline operations. They often experience significant wear-and tear during their relatively short lifespans, and may require good low-temperature performance on various plastic and cardboard substrates.

ADHESIVES

RP51

Multipurpose performance

This multipurpose, strong permanent adhesive is suited to a wide range of retail and logistics applications. RP51 adheres well to packaging films, card and corrugated boards, and after labelling retains good adhesion even in chilled temperatures of 0 to 5 C.

RHR5

Convenient weigh-pricing on PE bags

The specially adapted RHR5 hot-melt adhesive has balanced performance for convenient tack at room-temperature on PE weigh-price bags, plus good resistance to bleeding for clean, low-maintenance label dispensing. RHR5 is well-matched for weigh-price applications in grocery departments and has the necessary approvals for indirect food contact.

RH6

Shipping and logistics

The RH6 adhesive covers an extremely wide range of shipping and logistics labelling applications. RH6 performs well in chilled and room temperature conditions, on substrates including cardboard and stretch film. Compared to RP51, it also has slightly better cold tack on cardboard.

RR23

Long-lasting removability

RR23 provides exceptional long-term removabilitywith paper labels on a wide variety of substrates in logistics and retail uses. It also performs well on curved surfaces. For food labelling applications, RR23 meets the requirements of EU frame regulation EC 1935/2004, and complies with EU 10/2011 regarding components of food packaging containing plastic in its layers.

RS29

Resealable and repositionable

RS29 is a long-lasting resealable adhesive for filmic open-closure labels on substrates including HDPE, PP and glass. Retail and product labelling with RS29 covers dry goods which are resealed for freshness and convenience. RS29 also provides short-term repositionability with paper labels on a wide range of substrates, making it possible to correct any mislabelling.

RP38 TXL

Residue-free removal from textiles

For textile labelling on retail goods, RP38 TXL balances good tack to keep the label secured with residue-free removal to protect the value of goods.

RP36

Stable performance for luggage tagging

RP36 has increased cohesion to withstand the heat of thermal printing applications while also adhering well to itself when tags are looped back onto themselves. These are ideal properties for luggage-tagging applications.

RP45 & RP45 LW

Wash-off and recirculation for multi-use containers

RP45 and RP45 LW cover numerous rotational applications for plastic and metal crates, boxes, pallets, kegs and other multi-use containers. These adhesives last reliably for the lifecycle of the label and wash off quickly and cleanly for trouble-free container rotation

RP45 is intended for retail as well as standard logistics applications such as plastic transport boxes with smooth surfaces and metal kegs used by breweries. RP45 LW provides greater endurance on challenging rough and patterned surfaces and also in chilled warehouses and deep freeze conditions.

Optimal wash-off is achieved with hot alkaline water, though RP45 is also washable with pure hot water.

ULTRA-REMOVABLE ADHESIVES

RR522U, RR523U & RR524U

UPM Raflatac’s ultra-removable adhesives offer decisive removability where cleanliness really shows and where damage-free surfaces are essential to an item’s value. Clean removal also assists fast and cost-efficient handling.

These adhesives consist of minute adhesive spheres in an adhesive emulsion. This produces uniform, noncontinuous adhesive contact with the labelled surface, resulting in low-tack adhesion and a smooth peel-away.

The RR522U, RR523U and RR524U adhesives offer varying levels of tack for labelling in a wide range of logistics, general branding and retail promotion end uses, on surfaces from glass and white goods to books and newspapers.