Menu
MENU

Self Adhesive Labels

Eπίσης, δείτε Συστήματα Barcode & POS.

Oil & Industrial Chemical

Note: Novatron does not print labels.


Safety, information, traceability, and the prevention of stock losses – the label transforms industrial chemicals stored in Intermediate Bulk Containers (IBCs), steel and HDPE drums and many other container types into usable goods.

Adhesive selection needs to take into account the surface energy of polar surfaces like metals, paints and lacquers, and more challenging non-polar surfaces such as HDPE plastic. Other parameters include the smoothness or roughness of the labelled surface, the condition of the surface at the time of label application, and possible requirements for momentary repositionability.

After labelling, the adhesive needs to tolerate the conditions in which containers are stored and transported as well as any contact with the container contents. UPM Raflatac draws on decades of technical expertise to formulate adhesives for these highly demanding applications, for the lifetime of the labelled goods.

Pharmaceutical & Healthcare

Note: Novatron does not print labels.


Our pharmaceutical adhesives are developed, formulated and manufactured to meet industry regulations and safety requirements, including EMA, FDA, and IPAC-RS guidelines. We guarantee long-term stability of supply, with a minimum of 36 months’ rolling availability of unchanged materials and 12 months’ notice in advance of product changes. Full documentary support is provided for validation and approvals.

ADHESIVES

RP80 LT

Low-temperature storage down to -80C with multiple freeze-thaw cycles

RP80 LT is designed to perform in storage conditions down to -80 C. The RP80 LT adhesive also withstands multiple thawing and freezing cycles as samples are thawed at room temperature or in warm or iced water, and later returned to the freezer.

With good mandrel hold, this adhesive is recommended for identification labelling on laboratory vials, ampoulesand test tubes, as well as plates, slides, steel cabinetsand storage boxes. RP80 LT retains its adhesion for extended periods, on surfaces including glass, steel, cardboard and PP.

RP Cryo

Cryopreservation labelling down to -196 C

Cryogenic storage stops time for countless tissues, cell types and subcellular materials. But if these biological samples can’t be identified, they are lost forever.

UPM Raflatac label materials based on the RP Cryo adhesive withstand steam autoclave sterilization and cryopreservation conditions down to -196 C, in both vapour phase and liquid nitrogen. This adhesive is extremely resistant to thermal shock, and provides a strong and enduring bond to polypropylene (PP) cryogenic vials, tubes and storage boxes.

RP Cryo also withstands multiple thawing and freezing cycles, further ensuring that valuable biological samples are identifiable for the duration of their cryogenically extended lifetimes.

RP31 Purus

Migration-safe labelling for liquid drugs in plastic containers

RP31 Purus is a ‘migration safe’ adhesive with low leachable characteristics. Leachables are compounds that leach from packaging because of direct contact with the drug product under normal storage conditions and could potentially be dosed to a patient. Migration is a concern particularly for drugs in liquid or gaseous form, stored in containers made from plastic materials.

RP31 Purus performs well on small diameters and curved surfaces, and on a variety of labelling substrates including PP, PE and low-density polyethylene (LDPE). LDPE is widely used for squeezable nose or eye-drop containers, where migration safety is critical.

The FDA has assigned Drug Master file (DMF) number 25392, type III for RP31 Purus.

RP32 PB

Primary blood bag labelling

Regulatory requirements and the extreme conditions associated with blood storage and processing place stringent demands on labels for blood bags. RP32 PB has been developed and tested according to guidance from the ISO 3826 standard. It withstands temperatures of +121 C during steam sterilization, down to long-term storage conditions of -80 C. It also tolerates freezing in ethanol at -50 C.

RP32 PB has low-leachable characteristics on blood bags and is compatible with various plasticizers used in PVC blood bag manufacturing, including the most common, DEHP.

RP32 PB is supplied with a choice of non-PVC label faces according to market preferences.

RP31, RP31L, RC3P

Labelling small diameters

Small-diameter containers – such as syringes, ampoules, cartridges, pens, vials and test tubes – place special demands on label construction. UPM Raflatac’s research indicates that a diameter of 15 mm is the threshold at which the choice of label material becomes critical. Thin and flexible label faces are supplied with the following adhesives for optimal performance.

RP31 is formulated for labelling curved surfaces and small-diameter packaging. It offers a reliable solution for a wide variety of applications requiring excellent mandrel hold. RP31 bonds strongly to glass, HDPE and PP ubstrates.

RP31L is essential in applications where product identification must be secured by reducing the risk of missing labels to zero. Supplied with clear films, RP31L offers luminescent functionality for missing label detection on label dispensing lines and is a convenient and consistent solution compared to luminescent varnishing on-press.

RC3P is a UV-acrylic adhesive with excellent clarity for labelling on glass and is especially beneficial for visual checks of liquid container contents. Good water, heat and chemical resistance make RC3P suitable for a wide range of applications as well as end-uses requiring resistance to steam autoclave sterilization.

RP3H

Genuinely self-adhesive on surgical sterilization wraps and bags

ΤReusable surgical instruments leaving hospital operating theatres are cleaned, washed, packed on trays and wrapped in non-woven or crepe wrapping material, prior to sterilization by steam autoclave. Allpacks are individually labelled for identification and traceability.

RP3H retains excellent adhesion in the steam, pressure, and heat of the autoclave process, which is typically at 134 C for up to 18 minutes. This adhesive also accommodates swelling and shrinkage of various wrapping materials during and after processing.

Uniquely, RP3H labels are genuinely self-adhesive because no additional sealing tape is required to secure label adhesion. Light application by hand is both convenient and cost- efficient.